很多客戶反映說氣體增壓泵在用了一段時間之后，增壓泵的氣罐里總是會有水，以為是氣罐有裂縫，從外面滲水進去，或是缸體內部損壞，直接漏水進到氣罐內，但是氣壓又一直很穩定，機械設備運轉時又沒有問題，爭對于這個問題，小編跟大家聊聊是什么原因導致的。
Many customers reported that after the gas booster pump has been used for a period of time, there will always be water in the gas tank of the booster pump. They think that there is a crack in the gas tank, water seeps in from the outside, or the cylinder is damaged, and water directly leaks into the gas tank. However, the air pressure has been very stable, and there is no problem when the mechanical equipment is running. For this problem, Xiaobian will talk to you about the cause.
氣體增壓泵是不會自動產生氣體，它只是一款為了提高氣體壓力所研發出來的產品，所以必須是由外接低壓氣體設備進行驅動的，那這兩者之間的連通肯定是通過管道來對接。
The gas booster pump does not automatically generate gas. It is only a product developed to improve the gas pressure. Therefore, it must be driven by external low-pressure gas equipment. The connection between the two must be connected through pipes.
而低壓氣體設備因為各種外在條件的原因，它在運行時可能會出現有水分，而這些水分就會隨著氣管進入到增壓泵的氣罐內，而這些水分是會隨著輸入氣管進入到使用設備上的，如果想解決這個問題，必須要定期的檢查前端的供氣設備并清理，那氣罐里有水分這個問題就可以完全解決啦。
Due to various external conditions, the low-pressure gas equipment may have moisture during operation, and the moisture will enter the air tank of the booster pump along with the air pipe, and the moisture will enter the equipment with the input air pipe. If you want to solve this problem, you must regularly check the front-end air supply equipment and clean it, and the problem of moisture in the air tank can be completely solved.
在進行維護該設備的時候，要把罐體或者管道內的高壓氣體卸荷后在進行，一個是潤滑脂的涂抹要干凈，而是撞針內部的彈簧及密封圈視頻有缺損或者腐蝕，要及時更換。在維護的時候一定要根據之前講的一聽、二看、三確保步驟進行。
During the maintenance of the equipment, the high-pressure gas in the tank or pipeline should be unloaded. One is that the grease should be applied cleanly, but the spring and sealing ring inside the striker should be replaced in time if they are damaged or corroded. During maintenance, you must follow the steps of "listening, looking and ensuring".
增壓泵泵增壓加裝過濾器，保證被增壓氣體介質的潔凈，起到二次保護的作用，另外高壓出口如果壓力過高，提議加裝爆破片等安全防護措施。如高壓出口需要配置緩沖罐體/氣罐等。注意一定要購買承壓值要高于泵體的額定輸出壓力壓力容器（具有壓力容器證書）。
The booster pump is pressurized and equipped with a filter to ensure the cleanness of the pressurized gas medium and play the role of secondary protection. In addition, if the pressure of the high-pressure outlet is too high, it is proposed to install safety protection measures such as bursting discs. For example, the high-pressure outlet needs to be equipped with buffer tank / gas tank, etc. Note that it is necessary to purchase a pressure vessel (with pressure vessel certificate) with a pressure bearing value higher than the rated output pressure of the pump body.
The above are the matters related to the equipment. Pay attention to these during the use of the booster pump, which can make the booster pump work more stably and prolong its service life. For problems in use, you can consult us and follow our website http://www.madaboutmermaids.com Yes, learn more.
