網站公告:

新聞中心

濟南精拓流體設備有限公司

電話:0531-69951198

郵箱:jingtuolt@163.com

傳真:0531-69951198

地址:濟南市歷城區西周南路9號

網址:http://www.madaboutmermaids.com

常見問題

當前位置:首頁 - 新聞中心 - 常見問題 - 氣液增壓泵是如何進行工作

氣液增壓泵是如何進行工作的?

發布時間:2022-10-12 11:53:43   發布人:http://www.madaboutmermaids.com
現如今氣液增壓泵已廣泛應用到各個行業,其特點眾多,下面就為大家介紹下氣液增壓泵是如何進行工作的,以便讓您作為參考更好更順利的使用。
Now the gas-liquid booster pump has been widely used in various industries, with many characteristics. Now we will introduce how the gas-liquid booster pump works, so that you can use it better and smoothly as a reference.
氣液增壓泵以壓縮空氣做為動力的氣動往泵,一款以液壓油、水及乳化液為增壓介質,利用大面積活塞的低氣壓產生小面積活塞的高液壓。
The gas-liquid booster pump is a pneumatic pump driven by compressed air. It uses hydraulic oil, water and emulsion as the pressurizing medium, and uses the low pressure of large area pistons to generate high hydraulic pressure of small area pistons.
由單向閥控制的高壓柱塞不斷的將液體排出,增壓泵的出口壓力大小與空氣驅動壓力有關。當驅動部分和輸出液體部分之間的壓力達到平衡時,增壓泵會停止運行,不再消耗空氣。
The high-pressure plunger controlled by the check valve continuously discharges the liquid, and the outlet pressure of the booster pump is related to the air driving pressure. When the pressure between the drive part and the output liquid part reaches balance, the booster pump will stop running and no longer consume air.
當輸出壓力下降或空氣驅動壓力增加時,增壓泵會自動啟動運行,直到再次達到壓力平衡后自動停止。
When the output pressure drops or the air drive pressure increases, the booster pump will automatically start and run until the pressure balance is reached again.
采用單氣控非平衡氣體分配閥來實現泵的自動往復運動,泵體氣驅部分采用鋁合金制造。接液部分根據介質不同選用碳鋼或不銹鋼,泵的全套密封件均為進口產品,從而保證了氣液增壓泵的性能。
The single air control non-equilibrium gas distribution valve is used to realize the automatic reciprocating motion of the pump, and the gas drive part of the pump body is made of aluminum alloy. Carbon steel or stainless steel shall be selected for the liquid connection part according to different media. The full set of seals of the pump are imported products, thus ensuring the performance of the gas-liquid booster pump.
氣液增壓泵
氣體增壓泵B系列為二級增壓泵,可以將低壓力的氣體增至很高的壓力,驅動氣壓≤7bar,大可增至640Mpa。
The gas booster pump B series is a two-stage booster pump, which can increase the low pressure gas to a very high pressure. The driving pressure is ≤ 7bar, which can be greatly increased to 640Mpa.
該系列泵的換向方式與G系列完全相同,與G系列相比,他能夠在相同空氣驅動壓力下產生2倍的輸出壓力,整臺泵全部采用鋁合金及不銹鋼制造。
The reversing mode of this series of pumps is the same as that of G series. Compared with G series, it can produce twice the output pressure under the same air driving pressure. The whole pump is made of aluminum alloy and stainless steel.
在泵的氣驅部分該系列需用潤滑型氣體,以便讓密封和其他內部零件得到潤滑,該系列泵的驅動活塞直徑為160mm。更多相關該設備的事項了解,您可以來我們網站http://www.madaboutmermaids.com咨詢!
In the gas drive part of the pump, lubricating gas is required for this series to lubricate the seals and other internal parts. The drive piston diameter of this series of pumps is 160mm. For more information about this device, you can visit our website http://www.madaboutmermaids.com consulting service
新聞推薦:
氣體增壓泵要保持清潔及系統安全使用 2022-10-19
氣液增壓泵是如何進行工作的? 2022-10-12
氣體增壓泵的使用六點注意事項 2022-10-05
采購及使用氣液增壓設備需注意幾點 2022-09-25
氣液增壓泵的原理特點以及應用 2022-09-19
氣體增壓泵使用之前知道六要點 2022-09-17
氣體增壓泵如何工作以及如何維護 2022-09-15
氣體增壓泵和氣液增壓缸的工作原理不同 2022-09-05
怎么判斷各類型的增壓泵好與壞? 2022-08-26
通過表現來分析增壓泵常見幾種故障 2022-08-24

13188935873

qq

欧洲精品无码一区二区三区在线播放,欧美性爱动图,欧美人与动交片免費播放,欧美成在线精品视频